Category Archives: Survival

hinderer xm-18 knife

Hinderer XM-18 Titanium Framelock EDC Knife Review

hinder1

The Rick Hinderer XM-18 has become a legendary EDC knife.  Some people feel that  it is the best EDC knife ever.  It is worshiped and hyped on almost all the EDC knife forums.  Part of the reason for the hype is that most people have never laid hands on one.  It sells for around $800 if you can find one, and only Law Enforcement, Military and Fire/EMS personnel can buy one direct from Hinderer for about $400.  The big question is is it worth it, or is it the most overrated, over priced EDC knife on the market?

 

hinder2

This EDC knife is sometimes touted as a custom, but a ultra premium production knife is probably more accurate.  The basic concept of the knife is to make it very strong and overbuild it wherever possible.

Blade and Frame

It is a titanium framelock design with a flipper deployment .  There are also thumbstuds that are pressed into the blade.  The frame is titanium with a G-10 scale on the opposite side.  The blade is the Hinderer signature Spanto design, that offers maximum cutting potential in a blade that has a extra thickness for strength.  The blade is made from premium CPM-S35VN (60-61 HRC) steel.  This knife is the 3.5″ version, but a 3″ blade length is also available. The blade is fairly thick at .165″ and it could be used for prying in a pinch.  The blade is delivered very sharp, especially for such a thick blade. The XM-18 features a  Lock Bar Stabilizer that is an over travel stop, meaning it prevents the accidental over travel of the lock bar during closing of the EDC knife.  This prevents the complete over springing of the lock bar that would prevent the lock from functioning.

 

hinder3

Deployment

So far, everything seems great.  Unfortunately, when we wanted to take a look at the blade deployment we were very disappointed.  The pivot of the blade was too stiff and not smooth.  Maybe we got a bad one, but it is not the type of thing you expect on such an expensive blade.  After multiple adjustments of the pivot screw, lubrication and disassembly and additional lubrication/adjustment, the deployment is finally passable.

With the flipper, you may sprain your finger to only get it to deploy halfway.  Thumb studs work better, but this is a Hinderer, and it should work perfectly.  After the adjustment to get the blade to deploy better, the centering of the blade is off and it is microns from rubbing the liner.   After liberal application of  grease, the blade finally deployed in an acceptable fashion on its teflon washers. This is unacceptable, especially when  many other knives have smooth ball bearings that aid in smooth deployment. Once it’s deployed the knife feels beefy and locks up without any play.  Testing some other examples of the XM-18 has shown that smooth deployment varies from knife to knife.  For the price, this should be checked and adjusted from the factory.

Grip

The Hinderer XM-18 feels good in the hand.   The G-10 scale has a pattern that is grippy without being too aggressive.  The blade features aggressive jimping and the shape of the handle incorporated with the flipper tab provides an excellent grip and hand position.   There is a choil area that can also be used if needed.

Fit and Finish

The stone washed frame and blade are ruggedly handsome and will hide wear well.  The knife is assembled well with the exception of the smooth deployment.   The look is premium without appearing delicate.

Carry

The use of titanium helps it maintain a moderate weight of 5.6 ounces, impressive for such a substantial EDC knife.  It carries well in the pocket and feels like a smaller knife.  While we are making adjustments, we need to adjust the pocket clip.   Out of the box, it is so tight that it will bunch up the fabric on your pants as you draw the knife.  This may be the best way to prevent the loss of the expensive EDC knife though.

hinder4

Maybe the old saying “Never meet your heroes” rings true in this case.

If you like the Hinderer design, buy a Hinderer collaboration Zero Tolerance Knife.  The models like the Zero Tolerance 550 and 560 series have Hinderer design elements except for the Spanto blade shape (they use a modified drop point) and function like they should at a much better price point.  These knives also feature Titanium frames.   In general, the XM-18 is not worth the hassle or the price that it takes to get one  from a practical standpoint.   Even with the exclusivity and cool factor, it will likely underwhelm you as an EDC knife.

 

hinder5

benchmade 950 9555 auto knife

Benchmade 940 Rift Auto (9555) EDC Knife Review

9555-950-2  9555-950-1

This is the Benchmade 9555 Auto Rift EDC Knife.  It is a medium-large knife for EDC, but it carries very well.  The blade is made from 154CM which is an excellent steel in terms balancing hardness and corrosion resistance.   The rest of the specs are below:

Blade Length: 3.67″
Blade Thickness: 0.114″
Handle Thickness: 0.560″
Blade Material: 154CM Stainless Steel
Blade Hardness: 58-60HRC
Pocket Clip: Tip-Up, Black Split-Arrow, Reversible
Lock Mechanism: AXIS
Overall Length: 8.27″
Closed Length: 4.60″
Class: Black
Weight: 4.80oz

9555-950-3

The 9555 is uses the auto Axis lock and deploys by pressing the Axis lock. For those that cannot carry an automatic knife or prefer a manual Axis lock with thumb studs, the Benchmade 950 Rift is the manual version of this EDC knife.

I really like the reverse tanto Osborne Design blade shape, and there is lots of strength in the tip of the blade. The lockup is rock solid even after a couple months of use. The blade also deploys with a solid “thwack”.

Some people have complained about the edges on the G10 scales, but Benchmade seems to have corrected that issue on later production runs. I really wish that the 420J steel liners had been milled out to reduce weight. As it sits now, my 9555 weighed in at an even five ounces. I wouldn’t want to EDC anything heavier. A little jimping would be nice, but it is non-existant on this blade. This EDC knife has a deep belly that it is the best for slicing and general utility use. Overall it’s a winner, and one of my personal best EDC knives, but could be even better with some simple changes.